Kenda Trailer Tires and Wheels – AM30670 12 Inch Tire with Wheel 5 on 4-1/2 Inch 4.80-12 Load Range C Steel Wheels – Galvanized Boat Trailer Wheels Bias Ply Tire Kenda Bias tire has a ply rating of 6 and a 990-lb maximum load at 90 psi. The 12″ diameter x 4″ wide steel trailer wheel features a 5 on 4-1/2 bolt pattern and a corrosion-resistant galvanized finish. Features: The Loadstar trailer tire is designed for excellent handling at high speeds 8-Spoke steel wheel is galvanized to resist rust Tire-and-wheel assembly meets Department of Transportation specifications Specs: Rim dimensions: 12″ diameter x 4″ wide Bolt pattern: 5 on 4-1/2″ Wheel capacity: 1,250 lbs Wheel bolt size: 1/2″-20 Pilot diameter: 3.19″ Offset: 0 Tire size: 4.80-12 Section width: 4.9″ Outer diameter (when inflated): 20.7″ Tire capacity: Load range: C Ply rating: 6 Maximum load: 990 lbs at 90 psi Warranty: 5-Year on tire Limited 2-year on wheel 1-Year Worry-Free Guarantee This tire has a 1-year worry-free guarantee. If within the first 12 months the tire is damaged in any way, it will be replaced at no charge. Bias Tires vs. Radial Tires Bias vs. radial tire graphic Bias ply tires are designed for off-road or agricultural applications. They are built with thick, durable nylon cords that are positioned at a 30- to 45-degree angle to the direction of travel. The layers alternate in a crisscross pattern, making the sidewalls stiffer so that the entire tire is able to flex easily. As a result, the tire provides a smooth ride and improved handling when trailering on uneven surfaces. Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit. Bolt Pattern – Odd To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: “5 on 4-1/2″ means 5 bolt holes with 4-1/2” measured to a point halfway between the opposite bolt holes.) Bolt Pattern – Even On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: “8 on 6-1/2″ means 8 bolt holes with 6-1/2″ from the center of one hole to the center of another on the opposite side.) Bolt Pattern – Side Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern. If D = 2-5/8″, then the bolt pattern is 5 on 4-1/2″ If D = 2-3/4″, then the bolt pattern is 5 on 4-3/4″ If D = 3″, then the bolt pattern is 5 on 5″ If D = 3-1/4″, then the bolt pattern is 5 on 5-1/2”

130.00$ Original price was: 130.00$.100.00$Current price is: 100.00$.