Go Power Industrial Pure Sine Wave Inverter with Transfer Switch – 1,500 Watt – 12V

Description

Go Power RV Power Inverter – 34279458

1,500-watt inverter lets you use appliances and devices wherever the road takes you. Pure sine wave technology is perfect for sensitive electronics like HDTVs and computers. Built-in automatic transfer switch changes to shore power when available.

Features:

• 1,500-Watt inverter provides AC power for electronics and appliances
  • Changes your battery’s DC output into AC power and sends it to the RV’s electrical system
• Pure sine wave technology replicates household AC power, allowing you to run devices safely
  • Perfect for sensitive electronics like HDTVs and computers
• Integrated transfer switch automatically changes from inverter to shore power when you hook up at the campground
• LED indicators show input voltage level, output load level, and fault conditions
• Multiple connection points let you secure cables and external devices to the inverter
  • Includes AC input and output terminals, DC input terminals, and remote port
• Built-in safety features protect your RV’s electrical system
• Fixed-mount remote (sold separately) lets you monitor and control the inverter from inside your RV
• Fuse block installation kit (sold separately) lets you safely connect the inverter to your RV battery

Specs:

• Application: 12V battery systems
• Rated power:
  • Running (rated) power output: 1,500 watts
  • Starting (surge) power output: 2,400 watts
• Voltage:
  • Maximum power: 12V DC
  • Input: 10 – 16 VDC
  • Output: 100 – 120 VAC
• Transfer switch power: 20 amps
• Temperature ranges:
  • Operating range: -4 F to 104 F
  • Storage range: -22 F to 158 F
• Maximum wire gauge: #1 AWG
• Dimensions: 13-7/8″ long x 11-1/4″ wide x 5-1/16″ tall
• Weight: 12.13 lbs
• 2-Year warranty

This 12V inverter with built-in transfer switch changes DC output from your RV batteries into AC power and sends it to the electrical system. Using pure sine wave technology, it creates clean power with low distortion, making it safe, efficient, and perfect for sensitive electronics like computers. The inverter can generate 2,650 starting watts and 1,500 running watts which is a great fit for appliances and electronics. Additionally, with the integrated transfer switch, it will automatically change from inverter to shore power when available.

Functions and Features

The inverter includes hardwired input and output terminals for AC loads, positive and negative DC input terminals that connect to your batteries, and a port for a fixed-mount remote (sold separately). It has a function switch that lets you select different output voltages (100V, 110V, 115V, and 120V) and frequencies (50Hz and 60Hz). This switch can also turn the power saver on and off. Additionally, the power saving adjustment dial near the function switch sets the input and wake up thresholds for the power saver.

The system includes a number of safety features. It offers protection from over/under voltage, overloading, and overcurrent. The inverter also uses a heat sink process to protect from extreme temperatures, and an internal cooling fan removes excess heat from the unit.

For additional safety, installing a fuse between the battery bank and the inverter will protect your equipment from power surges. The Go Power 200-amp fuse block (sold separately) works with this unit and uses a slow blow time-delay feature to withstand surge current. This means it can handle short surges over 200 amps without blowing the fuse, which is great for devices with motors that require more energy to start.

Built-In Transfer Switch Automatically Switches to Shore Power

The integrated transfer switch selects the primary source of AC current. The switch inside of this inverter has been pre-wired to automatically change from inverter to shore power to conserve battery life. This switch includes a 20-amp leg rated at 120V. To prevent electrical interruptions, the time delay circuit board allows the alternate power source to stabilize before a transfer occurs. Additionally, since the switch only accepts one active source, it protects your electrical system from dangerous backfeed that can damage your equipment.

How It Installs

The inverter mounts inside your RV in a dry location with ventilation. It should be installed in close proximity to the battery bank, but not in the same compartment. The DC terminals are wired to the battery bank. There are several ways to connect the inverter to your RV’s electrical system, but this will depend on your rig and how you want to use your inverter.

Available Fixed-Mount Remote Provide Easy Monitoring and Control

The Go Power GP-SWR-A Inverter Remote (sold separately) lets you turn your inverter on and off from inside your RV. It also has a LED which indicates the inverter’s status